Copper plate, strip, tube, bar, busbar and copper alloys. Tell us the grade, specifications, quantity and destination, and we will quote to your order requirements.
For a faster quote, include: grade · specifications · quantity · processing requirements · destination
Copper Products
Choose the Copper Product You Need
Choose the product first, then check the grade, specifications and processing requirements. You can still request a quote if the grade is not yet confirmed.
Product FormCopper Plate, Coil & Strip, Tube, Bar, Busbar, Wire and Foil
Other Requirements
02
Copper TypeSelect Directly When the Material Is Known
03
Common GradesCommon UNS / ASTM grades used in international procurement are shown first. Enter any grade not listed.
Please provide the specific grade for this copper type with your order requirements.
04
Applicable StandardsProvide the Required Standard Together with the Grade
Plate & Sheet
Copper Plate / Sheet
Copper plate and sheet are generally confirmed by thickness, width and length. Temper, tolerances, surface condition and downstream processing requirements are checked with the order.
Key Dimensions
Thickness · Width · Length
Order Requirements
Temper · Tolerance · Surface
Processing
Shearing · Cut-to-Length · Cutting
Documents
Drawings or Material Lists Accepted
Coil & Strip
Copper Coil / Strip
Copper coil and strip are mainly confirmed by thickness, width, coil weight or inside diameter. Temper, tolerances and slit widths are checked against order requirements.
Key Dimensions
Thickness · Width
Coil Details
Coil Weight · Inside Diameter
Order Requirements
Temper · Tolerance
Processing
Slitting · Cut-to-Length
Tube
Copper Tube / Pipe
Copper tube is mainly confirmed by outside diameter, wall thickness and length. Temper, dimensional tolerances and cleanliness requirements are checked according to the application and order.
Key Dimensions
Outside Diameter · Wall Thickness · Length
Order Requirements
Temper · Dimensional Tolerance
Other Requirements
Cleanliness · Surface
Documents
Drawings or Material Lists Accepted
Bar & Rod
Copper Bar / Rod
Round bar is generally confirmed by diameter and length. Other cross-sections can be checked against dimensions or drawings, with temper, tolerances and straightness confirmed per order.
Key Dimensions
Diameter or Cross-Section · Length
Order Requirements
Temper · Tolerance
Geometric Tolerances
Straightness
Processing
Cut-to-Length · Cutting
Copper Busbar / Profile
Copper Busbar / Profile
Copper busbar is generally confirmed by width, thickness and length. For custom cross-sections, provide a drawing and specify the grade, conductivity and processing requirements.
Key Dimensions
Width · Thickness · Length
Custom Cross-Section
Dimensions per Drawing
Material Requirements
Grade · Temper
Other Requirements
Conductivity · Processing
Wire / Foil
Copper Wire / Foil
Copper wire is mainly confirmed by diameter, temper and spool requirements; copper foil is confirmed by thickness, width, temper, coil diameter or weight, and surface requirements.
Key Dimensions
Wire Diameter · Foil Thickness · Width
Coil Details
Coil Diameter · Coil Weight
Order Requirements
Temper · Surface
Packaging
Spool · Coil Protection
ProductCopper Plate / SheetCopper TypeTo Be ConfirmedGradeTo Be ConfirmedStandardConfirm per Order
Common UNS grades used in international procurement are shown first. Grades cannot be treated as directly interchangeable across different standards, tempers or product forms. Please also provide the applicable ASTM / UNS, EN, JIS, DIN or other order standard.
Procurement NotesIf a specific standard is required, submit it together with the grade.
Pure Copper / Oxygen-Free CopperC10100
High-Purity Oxygen-Free Copper
A commonly specified UNS grade for international electronics, electrical and high-purity copper inquiries. Product form and performance requirements are confirmed per order.
Different Copper Products Require Different Specifications
Different products require different parameters. Send us the grade, specifications, temper and processing requirements, and we will confirm the available supply range against your order.
If slitting, cut-to-length, shearing, cutting, straightening or surface treatment is required, specify it before quotation. The available scope is confirmed according to the product, grade and specifications.
Already Have a Specification Sheet or Drawing?Include the grade, dimensions, tolerances and processing requirements directly in your procurement request.
Copper plate, coil & strip, tube, bar and busbar have different supply methods. After the grade, specifications, temper and processing requirements are confirmed, the manufacturing, processing or supporting supply method is determined.
Production SiteCopper Manufacturing & Processing Photos
01
Order Requirement Confirmation
First confirm the copper type, grade, applicable standard, temper, specifications, quantity and application.
Determine the appropriate manufacturing or processing method according to the product form, such as plate, coil & strip, tube, bar, busbar, wire or foil.
Basis: Product Form · Application · Delivery Schedule
03
Dimension & Temper Processing
Control thickness, width, diameter, wall thickness, length, temper and allowable tolerances according to the order.
Inspection is not limited to a single certificate. Grade, dimensions, tolerances, surface, performance and document requirements need to be confirmed at the quotation and order stage, then checked item by item after production as agreed.
Material Verification
01
Material & Grade Verification
Verify the grade, applicable standard, batch and material documents required by the order.
02
Dimensions & Tolerances
Check thickness, width, diameter, wall thickness, length or cross-section dimensions according to the product form.
03
Surface Condition
Check surface appearance, protection requirements and the surface condition specified in the order.
04
Performance Items
Confirm the required checks for mechanical properties, conductivity and other performance items according to the application.
05
Composition & Third-Party Requirements
Confirm chemical composition, inspection items and third-party inspection requirements according to the order.
06
Packaging & Marking Check
Before shipment, check packaging, labels, shipping marks, batch identification and accompanying documents.
Quality RequirementsIf specific inspection items, document formats or third-party agencies are required, specify them before quotation.
Certifications & Quality Documents
Management system certifications, material certificates and inspection documents form part of procurement verification. Contact us if you need to confirm specific documentation for your order.
01
Management SystemsISO 9001 / 14001 / 45001
02
Material & InspectionMTC / RoHS and Other Procurement Documents
Helps customers understand site management and audit status.
If you need to verify certificate numbers, inspection items or audit details, contact our sales team for the relevant documents.
Copper Applications
Find Copper by Application
Copper is used in power, refrigeration and heat exchange, machinery manufacturing, construction and new energy equipment. The specific product, material temper, dimensional tolerances and inspection requirements are confirmed according to the actual application.
Copper coil, plate, tube, bar and busbar require different protection methods. Confirm the transport method, destination, labels, shipping marks, wooden pallets or wooden cases together with the quotation requirements.
Packaging ReferenceCopper Tube Bundling & Sorting
Confirm bundling, protection and outer packaging according to the specifications, quantity and transport requirements.
Batch bundling, impact protection, specification labels and outer packaging requirements.
01Packaging Method
Pallets, wooden cases, bundling, moisture protection and other protective methods are confirmed per order.
02Labels & Batch Identification
Grade, specifications, quantity, batch and order identification facilitate incoming verification.
03Pre-Loading Check
Recheck quantity, outer packaging, markings and loading sequence.
04Shipping Documents
Packing information, material documents and agreed export documents are prepared with the order.
Any Specific Packaging, Labeling, Shipping Mark or Partial Delivery Requirements?Include them together so the quotation and order can be checked against the same delivery conditions.
Project Procurement
Multiple Specifications? Send the List Directly
If one project includes multiple copper products, list the grades, specifications, quantities, drawings, inspection requirements and delivery schedule in one file.
Confirm the grades, specifications, quantities, documents and delivery schedules for copper plate, coil & strip, tube & bar, and busbar in one place.
Delivery Arrangement
Pack by product form and arrange partial shipments according to the project schedule.
Suitable for orders containing multiple copper product forms that require procurement conditions and export delivery arrangements to be consolidated.
01
Specification Confirmation
Confirm the grade, standard, temper, dimensions and tolerances.
02
Material & Quality Documents
Prepare material certificates and quality documents according to the order requirements.
03
Inspection Requirements
Define the inspection items, sampling method and third-party requirements.
04
Packaging & Marking
Pack and mark by product, specification or batch.
05
Container Loading & Shipping Documents
Prepare the documents required for container loading, shipment and export.
Already Have a Project List, Material List or Drawings?Send us the material list or drawings, and we will check the requirements item by item for the project.
Grade, standard, temper, specifications, quantity, processing, inspection and delivery requirements are confirmed before quotation. After order confirmation, manufacturing, packaging and shipment are arranged against the same approved version.
01
Start by Identifying the Copper Product Range
Copper plate, coil & strip, tube, bar, busbar and copper alloys are confirmed separately; different product forms are not combined into one undifferentiated quotation.
Product Form
Copper Type & Grade
Order Standard
02
Confirm Key Parameters Before Quotation
Clarify the temper, dimensions, tolerances, quantity and application first, then determine the product and processing requirements to reduce revisions after the order is placed.
Temper
Dimensions / Tolerances
Quantity / Application
03
Confirm Inspection & Documents in Advance
Confirm at the quotation and order stage whether material documents, dimensional inspection, performance items or third-party requirements are needed and how they will be provided.
Material Documents
Inspection Requirements
Third-Party Inspection (If Required)
04
Confirm Packaging & Export Delivery in Advance
Confirm packaging, marking, container loading and documents according to the copper product form, destination and transport requirements to avoid last-minute documentation before shipment.
Already Have a Purchase List, Drawings or Material Standards?Submit the existing documents directly; it is faster than describing everything from the beginning.
What Information Is Usually Needed Before Quotation?
At minimum, provide the product form, grade or copper type, specifications, quantity and destination. Include any temper, tolerance, processing, inspection or packaging requirements as applicable.
Not Sure About the Grade? Start with the Application.
Yes. Provide the application, service environment, key performance requirements and product form, and we can narrow down the suitable material options. The final grade and applicable standard are subject to order confirmation.
Can Copper Coil, Strip, Plate or Bar Be Processed to Size?
You can specify slitting, cut-to-length, shearing, cutting, straightening or surface requirements. The exact processing method and tolerances need to be confirmed according to the product, specifications and quantity.
How Are Material Certificates, Performance or Third-Party Inspection Confirmed?
Before quotation or order confirmation, specify the material, dimensions, surface, performance, composition or third-party inspection requirements that need to be checked. Available documents and inspection items are subject to the confirmed order requirements.
When Should Export Packaging Requirements Be Specified?
Before quotation, specify the transport method, destination and requirements for waterproofing, wooden cases, pallets, edge protection, markings and related items. Packaging and delivery conditions will be confirmed together.
Can Multiple Copper Products Be Included in One Purchase List?
Yes. You can upload a material list, drawings or a purchase list directly. For multiple grades and specifications, list them on separate lines so quantity, processing, inspection and delivery requirements can be checked item by item.
Contact
How Would You Like to Contact Us?
Choose whichever option is most convenient.
Email Inquiry
Send Us Your Procurement Requirements
Fill in the details and submit directly. We will receive your inquiry.
Original Inquiry
HONGYUAN Copper InquiryContact Us Directly on WhatsApp
Enter the Product and Specifications, Then Open the Chat
Hello. Please select a product type and provide the grade, specifications and quantity.
Procurement Information Added
Common Copper Products
◌
Your Privacy Settings
We use required website data to keep the site working properly. Functional, analytics and marketing data are used only with your consent. You can change your choices at any time at the bottom of the page.
Privacy & Website Data
Choose Which Website Data to Allow
Required data is always enabled. Other categories take effect only after you consent. You can complete these settings without leaving this page.
Required Website Data
Used to save your privacy choices and maintain essential site functions and security. This cannot be disabled.
Always Enabled
Functional Preferences
Used to remember your language, interface preferences and selections on the site.
Analytics
Used to understand page visits and feature usage so we can improve the website experience.
Marketing
Used to measure campaign performance and, where relevant services are connected, provide more suitable content.
